OREI 4K@60Hz Wall Plate Transmitter up to 230ft
- Zero-latency transmission
- The transmitter is a wall socket design and can be embedded in the wall
- Extend 4K@60Hz HDMI signal up to 70m/230ft over Cat6/6A/7 cable
- Support HDR10
- Support EDID passthrough and auto downscaling
- Support IR control (20~60KHz) of equipment at the TX end from the RX end
- Support Power-over-Cable (PoC), the receiver can be powered by the transmitter
- The receiver supports a 3.5mm stereo output
- Lightning protection, surge protection, ESD protection
Description:
UHD-IPC230-WPE is a 4K@60Hz 18Gbps 4:4:4 HDR HDMI Wall Plate Extender Over 70M CAT6, with zero latency and visually lossless compression transmission. It supports PoC, IR control, 3.5mm audio output, etc.
This kit is a reliable, ultra-high-definition video transmission solution, which is widely used in security monitoring, home theater, broadcasting, and other fields.
[shortdes]
- Support HDMI input
- Support 3D, HDR10 and Dolby Vision
- Support EDID passthrough
[/shortdes]
[tab1]
FAQs
Yes, you can purchase these things directly from us. Please contact us & we will assist you further.
No, this product doesn not extend multiple screens. It will duplicate the input sources to multple outputs.
Yes, you will be able to get a signal beyond the mentioned distance but the quality of the video decreases with increase in the distance and that too when using with shielded CAT6 cable.
Yes, you can implement the daisy chain method.
Both the ends of the CAT cable should be termed as EIA-568B & the cable should be straight & not crossed.
We recommend you to use High-Quality HDMI cables & shielded CAT6 cables.
Yes, you can purchase the additional transmitter from us. Please contact us & we will let you know the price.
Yes, you can purchase the additional receiver from us. Please contact us & we will let you know the price.
No, this product doesn't upscale/downscale the video resolutions.
You can extend the display devices up to 400 Feet when using with a shielded CAT6 cable.
The issue might be with the CAT cable. This might be due to the external interference of the signals & CAT5e has low bandwidth as compared to the CAT6. We recommend you using shielded CAT6 cable.
If the power and link led lights does not illuminate on the RJ45 port of the transmitter and the receiver, then the transmitter & receiver might be dead.
Please contact us so that we can troubleshoot the issue.
You can upgrade the firmware by connecting the PC & this device via RS-232 cable.
Please note that this product only supports the CEC function between HDMI input & HDMI output 1.
No, optical output doesn't supports CEC due to its limitations. CEC will work only with HDMI devices.
HDBaseT is the technology used for long distance transmission of lossless signals, resulting extremely low latency & giving the best picture quality.
In normal extenders, if you extend your signals up to some extend, the quality of the signals will degrade & you may find some latency issues. HDBaseT is the lastest standard which provides extending your signals to the longer distance without degrading the quality of the signals & with 0 latency.
We recommend you using a shielded CAT6 cables for optimum performance.
Our all the extenders supports IR Frequency & the devices using RF frequency will not be compatible with our products.
The IR Blaster/Emitter should be connected to the IR out port on the Transmitter and the IR Receiver should be connected to the IR in on the Receiver.
Here's a quick overview of the IR connection on our extenders:
[/tab1]
![LG Lancet | VW820 Case, Wrist Strap Magnetic Flip Fold[Kickstand] Pu Leather Wallet Case with ID & Card Slots - Hot Pink Anchor](https://www.jlectrotech.shop/image/lg-lancet-vw820-case-wrist-strap-magnetic-flip-foldkickstand-pu-leather-wallet-case-with-id-amp-card-slots-hot-pink-anchor_4rSTlB_285x.webp "LG Lancet | VW820 Case, Wrist Strap Magnetic Flip Fold[Kickstand] Pu Leather Wallet Case with ID & Card Slots - Hot Pink Anchor")
